Gateway DC-M50 - Manual (Page 28)

28
INSERTING THE BATTERIES
This camera uses four AA-size alkaline or Ni-MH batteries.
* When using AA-size Ni-MH batteries, fully recharge them with a vendor-endorsed battery charger.
1 When replacing the batteries, slide the power switch to turn
off the camera.
• You may skip this step when inserting the batteries for the first time.
2 Slide the battery-chamber door slightly in the direction of
the arrow 1 and open it in the direction of the arrow 2 .
3 Insert the batteries by following the +/- diagram in the front
of the battery-chamber door.