Grizzly Extren Series Jointer g9860 - Manual (Page 27)

Extreme series Jointer (Mfg. since 9/11)
-25-
Table controls
Figure 30. table controls.
outfeed handwheel
& lock
infeed handwheel
& lock
depth of Cut scale
& pointer
Depth of cut Scale & pointer: indicates the
amount of workpiece surface that will be removed.
Marked in
1 ⁄
16
" increments.
Infeed & Outfeed handwheels & Locks:
raises and lowers the respective table. rotate
the handwheels clockwise to raise and coun-
terclockwise to lower the table. tighten the lock
knob in the center of the handwheel to secure the
setting.
Fence controls
Fence Lock: locks the fence assembly in place.
Fence Tilt handle: tilts the fence when the tilt
lock is loose.
Fence Tilt Lock: locks the fence tilt angle in
place when tightened.
Fence Stops: provide positive stops for the fence
at 90° and 45°
Fence adjustment handwheel (Model G9953/
G9953ZX/G9953ZXF): Moves the fence forward
and back when rotated.
cutterhead brake (G9953/G9953ZX/
G9953ZXF Only)
Figure 33. Cutterhead brake.
Cutterhead
Brake handle
cutterhead brake: turns the machine OFF and
brings the cutterhead to a rapid stop when the
handle is rotated.
Figure 32. Fence controls (Models g9953,
g9953zX, and g9953zXF).
Fence tilt lock
Fence
lock
Fence tilt
handle
adjustment
handwheel
Figure 31. Fence controls (Model g9860 and
g9860zX).
Fence tilt lock
Fence
lock
Fence tilt
handle
Fence stops