GE TC28041 Series - Manual (Page 37)

37
ENTER NAME Prompt telling you to enter the name in one of
the 50 memory locations.
ENTER NUMBER Prompt telling you to enter a telephone number
in one of the 50 memory locations.
HANDSET NAME Prompt telling you to enter the user name for the
registered handset.
HANDSET NEEDS Indicates you must register a non-registered
REGISTRATION handset prior to use.
INCOMPLETE DATA Caller information is interrupted during
transmission or the phone line is
excessively noisy.
LINE IN USE Displays on handset while the line is in use.
LONG DISTANCE Indicates CID record is from a long distance call.
LOW BATTERY Indicates the battery needs to be charged.
NEW Indicates call or calls have not been reviewed.
NEW CALL XX XX represents the number of new CID records
not reviewed.
NO CALLS Indicates there are no CID records in memory.
NO DATA No Caller ID information was received.
OUT OF RANGE May indicate handset is too far away from the
base or that
the power has been interrupted. Move closer
and check connections.
PAGING or Someone pressed the PAGE button on the base
or INT
PAGING FROM button on the handset
PLEASE REGISTER Indicates the handset needs to be registered
before use.
REPEAT Repeat call message. Indicates that a new call
from the same number was received more than
once.
SEARCHING Indicates handset is searching for the base.
SPEAKER Indicates the handset is in speakerphone mode.
UNKNOWN CALLER/ The incoming call is from an area not serviced by
Caller ID or
NAME/NUMBER the information was not sent.