GE TC28041 Series - Manual (Page 11)

11
PHONE SETTING Set display language, set area code,
register the handset to the base unit,
name the handset , deregister the
handset or reset to default setting.
DISPLAY SETTING Choose a preset or downloaded image to
be wallpaper of the idle display, set the
contrast and color scheme.
Phone Setting
There are seven programmable menus available: Language, Area Code,
Intercom Auto Answer, Handset Name, Registration, Deregistration and
Default Setting.
1. Make sure your phone is OFF (not in talk
mode).
. Press the MENU button and use the 6 or 5
button to scroll to PHONE SETTING.
3. Press the SELECT button to enter the menu.
Language
This menu allows you to change the language of the display prompts.
From the PHONE SETTING menu;
1. Use the 6 or 5 button to scroll to
LANGUAGE.
. Press the SELECT button to enter the menu.
3. Use the 6 or 5 button to scroll to the
desired language. The default is ENGLISH.
4. Press the SELECT button to save your
selection. You will hear a confirmation tone.
Area Code
If you enter your local 3-digit area code in the area code menu, your local
area code does not display on the Caller ID (CID) list. Instead, you only see
the local 7-digit number. Calls received from outside your local area code
will display the full 10-digits.
From the PHONE SETTING menu;
1. Use the 6 or 5 button to scroll to SET
AREA CODE.
. Press the SELECT button to enter the menu.
3. Use the number keys to enter your 3 digit
area code. “ - - - “ is the default setting.
4. Press the SELECT button to save your
selection. You will hear a confirmation tone.
REGISTRATION
PHONE SETTING
AREA CODE
LANGUAGE
DEREGISTRATION
HANDSET NAME
PHONE SETTING
ESPANOL
SET LANGUAGE
FRANCAIS
ENGLISH
SET LANGUAGE
— — —
SET AREA CODE SET AREA CODE