GE TC28041 Series - Manual (Page 19)

19
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service from your
local telephone company, you will receive Caller ID information (if available)
on Call Waiting calls. During a phone call, you will hear a beep to indicate
another call is waiting on the line and Caller ID information for the waiting
call shows on the handset display.
• To connect to the waiting call, press the FLASH/DELETE button on the
handset, and your original call is put on hold.
• To switch between the two calls, press the FLASH/DELETE button.
TIP: Don’t use the TALK/CALL BACK or SPEAKER button on
the handset to activate custom calling service such as call
waiting, or you’ll hang up the phone.
Last Number Redial
You may redial a number up to 3 digits long. To quickly redial the last
number you dialed:
1. Press the TALK/CALL BACK or SPEAKER button.
. Press the REDIAL button.
-OR-
To quickly choose from any of the last three numbers you dialed:
1. Press the REDIAL button first, then use the 6 or 5 button to select the
desired redial number.
. Press the TALK/CALL BACK or SPEAKER button, the number dials
automatically.
-OR-
If you get a busy signal and want to keep dialing the number, press the
REDIAL button to quickly redial the number.
Exit
Press the *EXIT button to exit a menu function and return to the standby
screen.
Page
The page feature helps you locate a misplaced handset. To send and
receive pages, all handsets must be registered. If your handset is not
registered, follow the instructions in the Registration section of this
manual.
Paging from the Base/Group Page
Use the base-only to page all registered handsets at the same time.
1. Make sure the phone is
OFF (not in talk mode).
. Press the PAGE button on the base.