GE TC28041 Series - Manual (Page 28)

8
1. Make sure your phone is OFF (not in talk
mode).
. Press the MENU button and use the 6 or 5
button to scroll to PHONE BOOK.
3. Press the SELECT button to enter the phone
book.
NOTE: You may press the PHONEBOOK button to shortcut to
the phone book, too.
4. Use the 6 or 5 button to scroll to ADD
RECORD.
5. Press the SELECT button to confirm. ENTER
NAME shows on the display.
6. Use the number keys to enter a name (up to
15 characters, including spaces). More than
one letter is stored in each of the number
keys. (The number 1 key can be used to
enter "space", "_", "*", and "!")
NOTE: If you make a mistake press the FLASH/DELETE
button to backspace and erase the wrong character(s).
7. Press the SELECT button to save the name.
The display shows ENTER NUMBER.
8. Use the number keys to enter the telephone
number (up to 0 digits, including pauses).
9. Press the SELECT button to save the number.
The display shows SET RINGER TONE.
10. Use the 6 or 5 button to scroll to your
desired ringer tone. You will hear a sample of
the ringer tone you select.
11. Press the SELECT button to save your
selection. The display shows PICTURE ID.
NOTE: When a picture is assigned to a phone book entry
a “*” will appear beside the entry.
1. The display shows DEFAULT: NO PICTURE
ID. Use the 6 or 5 button to scroll to your
desired picture.
13. Press the SELECT button to save the record. You
will hear a confirmation tone and the display
shows the whole record for seconds and then
shows the phone book records list again.
14. To enter another name and number, return to step 4 and repeat the
process.
PHONE BOOK
ADD RECORD
ENTER NAME
RING MELODY 3
RING MELODY 2
SET RINGER TONE
RING MELODY 4
RING MELODY 1
REC RING TONE
NO PICTURE ID
DEFAULT :
PICTURE ID
1 2 3 4 5
ENTER NUMBER