GE TC28041 Series - Manual (Page 22)

3) While in room monitoring mode, the initiating handset
can listen with the handset speakerphone by pressing
the SPEAKER button once. Switch back to the earpiece by
pressing TALK/CALL BACK button once. Press the *EXIT
button to end room monitoring.
Intercom Operation
The intercom feature allows you to have a conversation with another
registered handset without tying up the telephone line, allowing you to
still receive incoming calls.
IMPORTANT NOTE: The following procedures can ONLY be
done with Model 28011 and 28041 handsets.
Handset to Handset Intercom Call
1. Make sure the originating phone is OFF (not in talk mode).
. Press the MENU button and use the 6 or 5 button to scroll to
INTERCOM.
3. Press the SELECT button to enter the menu.
NOTE: You can press the INT button to shortcut to the menu.
4. A list of registered handsets shows on the display. Use the 6 or 5
button to scroll to the desired handset you want to page.
5. Press the SELECT button.
6. The receiving handset is paged and emits a tone.
7. To cancel the page, press the *EXIT, INT or TALK/CALL BACK button on
the originating handset.
8. Wait for the person at the receiving handset to press the INT button.
NOTE: If the receiving handset does not answer within two
minutes, the intercom call is automatically canceled and
the originating handset displays NO ANSWER.
9. When finished, press the *EXIT button or INT button on either handset
to deactivate the intercom.
Receiving an Intercom Call
When you receive an intercom call, your handset beeps. To answer the
call press the INT button on the handset.
Advanced Intercom Features
Receiving an Incoming Call During an Intercom Call
If you receive a telephone call during an intercom call, the intercom call is
immediately terminated and both handsets ring. Either handset user may
press the TALK/CALL BACK or SPEAKER button to answer the call.