GE TC28041 Series - Manual (Page 33)

33
Cued-up music typically produces the best sounding recorded ringer. It is
recommended to begin recording your ringer at the beginning of a song,
rather than a portion from the middle to produce an audibly pleasing
custom ringer.
1. Make sure your phone is OFF (not in talk
mode).
. Press the MENU button and use the 6 or 5
button to scroll to SOUND SETTING.
3. Press the SELECT button to enter the menu.
4. Use the 6 or 5 button to scroll to
RINGER
TONE.
5. Press the SELECT button to show the options.
6. Use the 6 or 5 button to scroll to
REC
RING TONE.
7. Press the SELECT button to show the 3 ways
to record your unique ringer tones
8. You may record your ringer tones via the included audio cable, via an
optional headset or via the handset microphone.
9. Use the 6 or 5 button to scroll to the correct setting.
10. Press the SELECT button to enter the count-down display.
NOTE: If the memory is full, the handset will prompt FULL
when the SELECT button is pressed in step 7.
Record with Included Audio Cable or an Optional
Headset
Audio Cable: Before recording the ringer tone, make sure that the
provided audio cable is correctly installed into your computer or CD
player or TAPE player by inserting the 3.5mm plug (the larger end of the
connector) into the headphone jack of your PC or audio source, and insert
the .5mm plug (the smaller end of the connector) into the headset jack
on the side of your 8041 handset or Optional Model 8011 handset.
Optional Headset: Before recording the ringer tone, make sure that the
optional headset is connected to the headset jack on the side of your
8041 handset or Optional Model 8011 handset.
From the REC RINGER TONE menu;
1. Use the 6 or 5 button to scroll to the
AUDIO_CABLE or HEADSET.
. Press the SELECT button to enter.
TONE 3
TONE 2
SET RINGER TONE
TONE 4
TONE 1
REC RING TONE
MICROPHONE
REC RINGER TONE
HEADSET
AUDIO_CABLE
SOUND SETTING
RINGER TONE
RINGER VOLUME
KEY TONE