GE TC28041 Series - Manual (Page 27)

7
NOTE: If the selected CID record contains any information
that is non-numeric, the unit will not allow this record to
transfer to the phone book.
Deleting a CID Record
1. Make sure the phone is OFF (not in TALK mode).
. Use the 6 or 5 button to scroll to the CID record you want to delete.
3. Press the MENU button to display
CALL OPTIONS.
4. Use the 6 or 5 button to scroll to DELETE.
5. Press the SELECT button to show DELETE CALL ID?.
6. Press the SELECT button again to confirm the deletion. The display
shows DELETED.
NOTE: Press the *EXIT button to return to the standby mode
or if no action is taken, it will exit automatically after one
minute.
Deleting All CID Records
1. Make sure the phone is OFF (not in TALK mode).
. Use the 6 or 5 button to display any Caller ID record.
3. Press the MENU button to display
CALL OPTIONS.
4. Use the 6 or 5 button to scroll to DELETE ALL?.
5. Press the SELECT button to show DELETE ALL?.
6. Press the SELECT button again to confirm the deletion. The display
shows DELETED. The display shows DELETED followed by NO CALLS.
NOTE: Press the *EXIT button to return to the standby mode
or if no action is taken, it will exit automatically after one
minute.
Phone Book
IMPORTANT NOTE: The following procedures can ONLY be
done with Model 28011 and 28041 handsets.
The cordless handset(s) have their own separate memory storage areas
which are not accessible to each other. You may store up to fifty 15-
character names (including spaces) and 0-digit telephone numbers in
the handset memory.
Adding Phone Book Entries
You may assign a specific melody and a downloaded picture for the
phone book entry. They will ONLY work if you have subscribed to the
Caller ID service. Then when that person calls, the assigned melody will
ring instead of the normal ring, and the downloaded picture will show on
the display.
You may choose from 10 different polyphonic melodies, 10 different ring
tones and 5 recorded ring tones.