GE ZET2R - Manual (Page 36)

The Sabbath feature can be used for baking/roasting
only. It cannot be used for convection, broiling,
self-cleaning or Delay Start cooking.
1 Touch OPTIONS.
2 Touch SABBATH.
After entering the SABBATH screen,
the touch screen pads will not sound. They
will change color to indicate they are set.
3 For double oven models only, touch UPPER
OVEN BAKE and/or LOWER OVEN BAKE
to select the desired oven(s).
4 Touch the numbers to set the desired
temperature between 170°F and 550°F.
No signal or temperature will be given.
5 Touch START.
6 After a random delay period of
approximately 30 seconds to 1 minute, the
oven will begin baking/roasting. The touch
screen will not change and the oven light will
be disabled.
To adjust the oven temperature, repeat steps 3,
4, 5 and 6.
To cancel the Sabbath option, touch and hold
CANCEL HOLD 3 SEC
for three seconds.
NOTES: CANCEL HOLD 3 SEC , CLEAR/OFF
and CANCEL are the only pads which are
immediately active during Sabbath baking.
These pads will cancel the current bake
operation immediately after being pressed
and should only be pressed after Sabbath ends.
All other keys have a delayed effect.
If a power outage occurred while the oven was
in Sabbath, the oven will automatically turn off
and stay off even when the power returns.
Sabbath mode will resume, but any bake
operation will be canceled.
NOTE: If a bake mode or a timed-bake mode
is active prior to entering the Sabbath mode,
those baking modes will still be active after
entering the Sabbath mode. All other cooking
modes will be canceled after Sabbath mode
begins.
Options—Sabbath and Help
Wall Oven
Sabbath
feature—
How to set
for regular
baking/
roasting
(Designed for
use on the
Jewish Sabbath
and
Holidays.)
(on some
models)
36
S ABBATH
O PTIONS
AND/OR
U PPER
O VEN
B AKE
L OWER
O VEN
B AKE
S TART
0 9 8 7 6
5 4 3 2 1
H ELP
E NTER
E XIT
H ELP
H ELP
S ELECT C ATEGORY
B AKE
B ROIL
C ONVECTION B AKE
C ONVECTION R OAST
K ITCHEN T IMER
Help feature Touch this pad to find out more about your oven’s
features.
1 Touch the HELP pad.
2 Touch the
▲ (up) or ▼ (down) arrow to
select the desired feature.
3 Touch ENTER.
4 Touch the
▼ (down) arrow, if present, to see
all of the HELP text.
5 Touch EXIT HELP to exit the HELP screen.