Self-cleaning oven, How to set the oven for cleaning – GE ZET2R User Manual
Page 27
27
Self-Cleaning Oven
Wall Oven
How to set
the oven for
cleaning
1
Touch SELF CLEAN.
2 For double oven models only,
touch
UPPER OVEN
or LOWER OVEN to select
the desired oven.
3
Three self clean time options are available:
• LIGHT CLEAN – Touch for an automatic
3-hour clean time. Recommended for use
when cleaning small, contained spills.
• REGULAR CLEAN – Touch for an automatic
5-hour clean time. Recommended for a
dirtier oven.
• CUSTOM – Touch and, using the numbers,
set a clean time between 3 hours and 7 hours
and 30 minutes, depending on how dirty your
oven is.
4
Touch NOW.
The door locks automatically. The screen will show
the clean time remaining. It will not be possible to
open the oven door until the temperature drops
below the lock temperature and OVEN LOCKED
goes off.
When OVEN LOCKED goes off, you will be able
to open the door.
• The words LOCK DOOR will appear and the
oven control will signal if you set the clean cycle
and forget to close the oven door.
• To stop a clean cycle, touch the CANCEL or
CLEAR/OFF
pad. When OVEN LOCKED goes
off, indicating the oven has cooled below the
locking temperature, you will be able to open
the door.
On double oven models, you can set a clean in both ovens
at the same time. The second oven set will automatically
delay the start of cleaning until the end of the first oven’s
clean cycle.
To set the second oven, there are two options
available:
• Immediately after setting the first oven:
Select PRESS TO MAKE LOWER OVEN
SELECTIONS
or PRESS TO MAKE UPPER
OVEN SELECTIONS
as needed and follow
steps 3 and 4.
• From the home screen:
1
Touch SELF CLEAN.
2
Touch LIGHT CLEAN, REGULAR CLEAN or
CUSTOM
. See above for reference.
3
Touch START AFTER 1ST SELF CLEAN
for the second oven to automatically start
cleaning after the first oven has finished.
OR
U
PPER
O
VEN
L
OWER
O
VEN
S
ELF
C
LEAN
L
IGHT
C
LEAN
OR
R
EGULAR
C
LEAN
C
USTOM
OR
0
9
8
7
6
5
4
3
2
1
On double oven models only.
N
OW
(Numbers will only be used when
setting a CUSTOM clean time.)