Warning – Graco Inc. 231-353 User Manual

Page 4

308-548

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

D This equipment is for professional use only.

D Read all instruction manuals, tags, and labels before operating the equipment.

D Use the equipment only for its intended purpose. If you are not sure, call Graco Technical Assis-

tance at 1–800–543–0339.

D Do not alter or modify this equipment.

D Check equipment daily. Repair or replace worn or damaged parts immediately.

D Do not exceed the maximum working pressure of the lowest rated system component. Refer to

the

Technical Data on page 36 for the maximum working pressure of this equipment.

D Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the

Tech-

nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warn-

ings.

D Do not use 1,1,1–trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or

fluids containing such solvents in pressurized aluminum equipment. Such use could result in a

chemical reaction, with the possibility of explosion.

D Do not use hoses to pull equipment.

D Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not ex-

pose Graco hoses to temperatures above 66_C (150_F) or below –40_C (–40_F).

D Do not lift pressurized equipment.

D Comply with all applicable local, state, and national fire, electrical, and safety regulations.

WARNING

INSTRUCTIONS

Liquids can be injected into the body by high pressure airless spray

or leaks – especially hose leaks.

Keep body clear of the nozzle. Never stop leaks with any part of the

body. Drain all pressure before removing parts.Avoid accidental trig-

gering of gun by always setting safety latch when not spraying.

Never spray without a tip guard.

In case of accidental skin injection, seek immediate

“Surgical Treatment”.

Failure to follow this warning can result in amputation or serious

injury.

FIRE AND

EXPLOSION HAZARD

SKIN INJECTION

HAZARD

READ AND UNDERSTAND ALL LABELS AND INSTRUCTION MANUALS BEFORE USE

Spray painting, flushing or cleaning equipment with flammable liq-

uids in confined areas can result in fire or explosion.
Use outdoors or in extremely well ventilated areas. Ground equip-

ment, hoses, containers and objects being sprayed.
Avoid all ignition sources such as static electricity from plastic drop

cloths, open flames such as pilot lights, hot objects such as ciga-

rettes, arcs from connecting or disconnecting power cords or turn-

ing light switches on and off.
Failure to follow this warning can result in death or serious injury.

NOTE: This is an example of the DANGER label on

your sprayer. This label is available in other

languages, free of charge. See page 36 to order.