Technical specifications, Amplifier section, Stereo mode – GoVideo DHT7000 User Manual
Page 41: Surround mode, Inputs (analog), Outputs (analog), Outputs (digital), Dvd system, Laser, Signal format system

35
Connections
Getting Sta
rted
Se
tu
p
Basi
c
Ope
rations
Ad
vanc
e
d
Fe
atures
He
lp
:: Technical Specifications
Amplifier Section
Stereo Mode
40W + 40W (6
Ω at 1 kHz, THD 10%)
Surround Mode
Front: 40W + 40W; Center: 40W; Rear: 40W + 40W (6
Ω at 1kHz, THD 10%); Subwoofer: 66W; Note:
Depending on the sound field settings and the source, there may be no sound output from Center, Rear or Subwoofer channels.
Inputs (Analog)
VIDEO 1,2 - Sensitivity: 200mV; Impedance: 50 k
Ω
Outputs (Analog)
VIDEO 2 (AUDIO OUT) - Voltage: 2V; Impedance: 1 k
Ω
Outputs (Digital)
OPTICAL OUT (CD) - Level: -18dBm
DVD System
Laser
Semiconductor laser
Signal Format System
NTSC
Frequency response
at 2 CH STEREO mode - DVD (PCM): 20Hz to 20kHz (6 1.0dB); CD: 20Hz to 20kHz (6 0.5dB)
Signal-to-noise ratio
More than 80dB (VIDEO 1 (AUDIO) connectors only)
Harmonic distortion
Less than 0.1%
FM Tuner Section
System
PLL quartz-locked digital synthesizer system
Tuning range
87.5 – 108.0MHz (100kHz step)
Antenna
FM wire antenna
Antenna terminals
75
Ω, unbalanced
Intermediate frequency
10.7MHz
Disc plays automatically.
• The DVD features an auto playback function.
Playback stops automatically.
• Some discs contain an auto pause signal. While playing such a disc, the system stops playback at the auto
pause signal.
Cannot perform certain func-
tions, such as Stop, Search,
Slow Motion Play, Repeat Play,
or Program Play.
• Depending on the disc, some operations may not be available. See the documentation that came with the disc.