GoVideo DHT7000 - Manual (Page 30)

24
DHT7000 Home Theater System
Listening to the Radio
1 Press the FUNCTION button to switch to the Tuner (AM/FM) function.
•
The last station received is tuned in and its band and frequency are displayed on the front panel display.
• You can also press the AM/FM key as a shortcut to enter the Tuner function.
2 To select a preset station, press the PRESET +/- buttons on the remote control to skip to the next or previous station.
3 To change tuner bands, press the AM/FM button to toggle between AM and FM.
4 To tune in non-preset stations, press the TUNING +/- buttons on the remote control:
•
To tune manually, press the TUNING +/- buttons repeatedly until the desired station is tuned in.
• To tune automatically, press and hold the TUNING +/- buttons until “Tuned” appears on the front panel display.
5 To improve reception, relocate the supplied antennas.
Adjusting Stereo/Mono
If an FM station is noisy, press the ST/MONO button on the remote control so that Mono appears on the front panel display.
•
This turns off stereo sound but may improve reception.
• To switch back to stereo, press ST/MONO again.
• Not all stations are broadcast in stereo. For those stations without stereo, pressing the ST/MONO button has no effect.
Adjusting Bass/Treble
While in the Tuner function, press BASS/TREB to toggle between bass and treble.
•
Adjust Bass level from -6dB to +6dB.
• Adjust Treble level from -6dB to +6dB.