GoVideo DHT7000 User Manual
GoVideo Home Theater Systems
Table of contents
Document Outline
- Table of Contents
- Chapter 1 Getting Started
- :: Welcome
- :: System Overview
- Remote Control
- 1 DISPLAY
- 2 POWER
- 3 0-9
- 4 CLEAR
- 5 PROGRAM
- 6 A-B
- 7 REPEAT
- 8 MUTE
- 9 VOLUME +/-
- 10 SETUP
- 11 ENTER
- 12 TITLE
- 13 PLAY
- 14 STOP
- 15 TUNING-/SCAN BACKWARD AA
- 16 TUNING+/SCAN FORWARD ""
- 17 AM/FM
- 18 ST/MONO
- 19 SLOW
- 20 ANGLE
- 21 GO TO
- 22 EJECT
- 23 FUNCTION
- 24 TEST TONE
- 25 ZOOM
- 26 TRIM
- 27 SOUND
- 28 L/R
- 29 DISC MENU
- 30 ARROW KEYS Y/B/A/"
- 31 RETURN
- 32 PAUSE/STEP
- 33 PRESET+/SKIP FORWARD ""|
- 34 PRESET-/SKIP BACKWARD |AA
- 35 BASS/TREB
- 36 MEMORY
- 37 AUDIO
- 38 SUBTITLE
- Front Panel Controls
- Front Panel Display
- 1 DVD Status Indicator
- 2 DVD Video Indicator
- 3 Repeat Status Indicator
- 4 AB Repeat Indicator
- 5 Title Number Indicator
- 6 Track Number Indicator
- 7 Chapter Number Indicator
- 8 Program Indicator
- 9 Tuner Indicator
- 10 DTS Indicator
- 11 Dolby Digital Indicator
- 12 KHz Indicator
- 13 MHz Indicator
- 14 Speaker Status Indicator
- 15 Playback Status Indicator
- 16 Pause Indicator
- 17 Elapsed Time Indicator
- Rear Panel
- Remote Control
- Chapter 2 Connections
- Chapter 3 Setup
- :: Setup Menu Overview
- :: Language Setup
- :: Video Setup
- :: Audio Setup
- Dolby Digital Setting
- DTS Setting
- MP3 Setting
- CD/VCD Setting
- :: More Audio Setup
- :: Rating Setup
- :: Speaker Setup
- Chapter 4 Basic Operations
- :: First Things First
- :: Basic Disc Playback
- Playing a DVD, CD or VCD
- 1 Turn on the TV and make sure the TV’s video input source is set to view the DVD system.
- 2 Press the POWER button on the remote control or front panel to wake up the DVD system from stan...
- 3 Press EJECT on the remote control or front panel to open the disc drawer.
- 4 Place the disc in the drawer with the label side facing up and playback side facing down. If th...
- 5 Press EJECT again to close the disc drawer.
- 6 Adjust the volume of the system with the VOLUME +/- buttons on the remote control, or by using ...
- 1 Turn on the TV and make sure the TV’s video input source is set to view the DVD system.
- Disc Menu Navigation
- Additional Disc Playback Options
- Playing a DVD, CD or VCD
- :: Basic Tuner Operation
- Presetting Radio Stations
- 1 Before you begin, turn the volume down on the system to avoid sudden and excessive noise from t...
- 2 Press the FUNCTION button to switch to the Tuner (AM/FM) function.
- 3 Press the AM/FM button to select the desired band.
- 4 Press and hold TUNING + or - until the frequency starts to change, then release.
- 5 Scanning stops when the system tunes in a station. “Tuned” appears on the front panel display.
- 6 Press MEMORY. “Mem To - -” appears on the front panel display.
- 7 Use the 0-9 keys to enter a number from 01 to 15.
- 8 Press ENTER to confirm the memory number. The station is stored.
- 9 Repeat steps 3 to 8 to preset up to 15 stations in each band.
- 1 Before you begin, turn the volume down on the system to avoid sudden and excessive noise from t...
- Listening to the Radio
- 1 Press the FUNCTION button to switch to the Tuner (AM/FM) function.
- 2 To select a preset station, press the PRESET +/- buttons on the remote control to skip to the n...
- 3 To change tuner bands, press the AM/FM button to toggle between AM and FM.
- 4 To tune in non-preset stations, press the TUNING +/- buttons on the remote control:
- 5 To improve reception, relocate the supplied antennas.
- 1 Press the FUNCTION button to switch to the Tuner (AM/FM) function.
- Adjusting Stereo/Mono
- Adjusting Bass/Treble
- Presetting Radio Stations
- Chapter 5 Advanced Features
- :: Special Playback Features
- Display
- Go To
- Title
- Angle
- Zoom
- Subtitle
- Audio
- Repeat
- A-B Repeat
- Program Playback
- 1 Press PROGRAM while a DVD/CD is in Stop mode.
- 2 Use the arrow keys to move the cursor to one of the 12 empty placeholders.
- 3 Use the 0-9 keys to enter the number of the title/chapter or track you wish to add to your play...
- 4 Repeat this process until all chapters/tracks are added in the desired order.
- 5 When finished, move the cursor to Play Program and press ENTER. The disc will play in the progr...
- 6 To cancel Programmed Play, press STOP and then press CLEAR.
- 1 Press PROGRAM while a DVD/CD is in Stop mode.
- Enhance Video Setting
- :: VCD Playback
- Playing VCDs
- 1 Insert a VCD with PBC and press PLAY.
- 2 As playback starts, the PBC menu appears on the screen.
- 3 Use the arrow keys or the 0-9 key to select the desired track number.
- 4 Press ENTER to confirm your selection.
- 5 Follow the instructions in the PBC menu or supplied with the disc for special interactive featu...
- 6 To return to the PBC menu during playback, press the RETURN button.
- 1 Insert a VCD with PBC and press PLAY.
- Sound
- L/R Button
- Playing VCDs
- :: MP3 Playback
- :: Special Playback Features
- Chapter 6 Help
- :: Troubleshooting
- :: Technical Specifications
- :: Warranty
- :: Safety
- Important Safety Instructions
- 1 Read Instructions
- 2 Retain Instructions
- 3 Heed Warnings
- 4 Follow Instructions
- 5 Cleaning
- 6 Attachments
- 7 Water and Moisture
- 8 Accessories
- 9 Ventilation
- 10 Power Sources
- 11 Grounding or Polarization
- 12 Power–Cord Protection
- 13 Protective Attachment Plug
- 14 Outdoor Antenna Grounding
- 15 Lightning
- 16 Power Lines
- 17 Overloading
- 18 Object and Liquid Entry
- 19 Servicing
- 20 Damage Requiring Service
- 21 Replacement Parts
- 22 Safety Check
- 23 Wall or Ceiling Mounting
- 24 Heat
- Safety/Regulatory Information
- Notes about Discs
- Important Safety Instructions
- :: Setup Menu Tree