Dolby digital setting, 1 press setup, 2 select audio and press enter – GoVideo DHT7000 User Manual
Page 21: 3 select dolby d and press enter, 4 set analog out (from video 2 out) to, 6 channel, 2 channel, 5 set digital out (from optical out) to, Bitstream, 6 press setup to save and exit
15
Connections
Getting Sta
rted
Se
tu
p
Basi
c
Ope
rations
Ad
vanc
e
d
Fe
atures
He
lp
Dolby Digital Setting
Follow these steps to set the analog and digital format of outgoing
Dolby Digital 5.1 soundtracks:
1
Press SETUP.
2
Select Audio and press ENTER.
3
Select Dolby D and press ENTER.
4
Set Analog Out (from Video 2 Out) to:
6 Channel
(default) To output only the front left and front
right signals of the 5.1 soundtrack.
2 Channel
To output downmixed 2 channel stereo; e.g. to a
VCR or TV.
5
Set Digital Out (from Optical Out) to:
PCM
(default) To output 2 channel digital audio; e.g. to a Minidisc recorder.
Bitstream
To output the 5.1 channel digital bitstream to an external amplifier with a Dolby Digital decoder.
Off
To disable Dolby Digital output.
6
Press SETUP to save and exit.
DTS Setting
Follow these steps to set the analog and digital format of outgoing
DTS soundtracks:
1
Press SETUP.
2
Select Audio and press ENTER.
3
Select DTS and press ENTER.
4
Set Analog Out (from Video 2 Out) to:
6 Channel
(default) To output only the front left and front
right signals of the DTS soundtrack.
2 Channel
To output downmixed 2 channel stereo; e.g. to a
VCR or TV
• PCM stands for Pulse Code Modulation, and is the standard 2-channel stereo format used for
audio CDs.