GoVideo DHT7000 - Manual (Page 20)

14
DHT7000 Home Theater System
:: Video Setup
The Video category allows you to set the size of your television, and your preferred format for widescreen movies (DVD only).
TV Aspect
TV Aspect adjusts the aspect ratio of your television (the length divided by
the width of the screen). Standard television screens are 4:3, while widescreen
televisions are 16:9. To set your TV Aspect:
1
From Stop mode, press SETUP.
2 Select Video and press ENTER.
3 Select TV Aspect and press ENTER.
4 Select the desired TV Aspect and press ENTER:
Fullscreen (default) Select if you have a standard 4:3 television and
prefer to watch the full-screen versions of DVD movies (if available).
Letterbox Select if you have a standard 4:3 television and prefer to
watch the widescreen versions of DVD movies (if available). Movies will display in letterbox format; i.e., black bars will
appear above and below the picture.
Widescreen Select if you have a widescreen 16:9 television.
5 Press SETUP to save and exit.
:: Audio Setup
Audio Setup allows you to match the output signals of the DHT7000 to an external recording device, processor/amplifer or receiver
connected via the Video 2 Out (analog) or Optical Out (digital) jacks. For example, if you connect the system to a VCR from the
Video 2 Out jacks, you should set Dolby Digital and DTS to 2 channel for downmixed stereo audio.
• You can set the audio format for each of the following sources: Dolby Digital,
DTS, MP3 and CD/VCD.
• DVD playback must be stopped in order to adjust the Audio Setup.