GoVideo DHT7000 - Manual (Page 16)

10
DHT7000 Home Theater System
Step 7 - Power on the System
1 Connect the power cord to a standard 120VAC/60Hz electrical outlet.
2 The red Standby LED will glow on the front panel to indicate that the system is plugged in and in Standby mode.
3 Press the POWER button on the front panel or the remote control to power on the unit.
About Standby Mode
• The system is always in Standby mode when the AC power cord is plugged into an electrical outlet.
• In Standby mode, the front panel display on the main unit turns off and the red power indicator light turns on.
• In power on mode, the front panel display on the main unit turns on and the red power indicator light turns off.
• The only way to power on the main unit is to press the POWER button.
• Please continue with Chapter 3 to adjust the operational set-
tings for your DVD system.