Grizzly Slip Roll 16 Gauge G5771 - Manual (Page 9)

g5771 50" slip roll 16 gauge
-7-
Additional Safety for Slip Rolls
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Like all machinery there is potential danger
when operating this machine. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to lessen the pos-
sibility of operator injury. If normal safety
precautions are overlooked or ignored, seri-
ous personal injury may occur.
4. cRUShING hAzARD. Make sure rollers
and workpieces are fully supported during
installation and removal. Wear steel toed
footwear during operation to protect your
feet if you drop a roller or workpiece.
5. EXPERIENcING DIffIcULtIES. if at any
time you are experiencing difficulties per-
forming the intended operation, stop using
the machine! Contact tech support at
(570) 546-9663.
1. MEtAL EDGES. always chamfer and de-
burr sharp metal edges before inserting
them into the slip roll. sharp edges on
sheet metal can cause severe cuts.
2. hAND PROtEctION. always wear leather
gloves when using this tool.
3. PINchING hAzARD. Keep fingers out of
roller path during operation.