Grizzly Slip Roll 16 Gauge G5771 - Manual (Page 23)

g5771 50" slip roll 16 gauge
-21-
SEctION 4: AccESSORIES
aCCessories
G5618—Deburring tool with two blades
the quickest tool for smoothing freshly sheared
metal edges. Comes with two blades, one for
steel and aluminum and one for brass and cast
iron. h6073—Deluxe Power Snip
lightweight aluminum cast handles. Full 3
1 ⁄
2
"
length of cut. replaceable steel blades. Fully
enclosed finger loops protect hands from sharp
edges. long handles provide plenty of leverage.
Multi-purpose snip for sheet metal, vinyl and plas-
tic.
figure 33. Model g5618 deburring tool.
figure 35. Model h6073 deluxe power snip.
figure 34. Boeshield® t-9 spray.
G2871—boeshield ® t-9 12 oz Spray
G2870—boeshield ® t-9 4 oz Spray
this ozone friendly protective spray penetrates
deep and really holds up against corrosive envi-
ronments. lubricates metals for months and is
safe for use on most paints, plastics, and vinyls.
figure 36. slipit ® gel and spray.
G5562—SLIPIt ® 1 Qt. Gel
G5563—SLIPIt ® 12 oz Spray
used on cast iron table surfaces and other
unpainted metal surfaces to reduce sliding friction
and hangups. this product also reduces rust and
prevents resin build-up.