beautypg.com

Assembly, Mounting – Grizzly Slip Roll 16 Gauge G5771 User Manual

Page 14

background image

-12-

g5771 50" slip roll 16 gauge

Assembly

the Model g5771 comes from the factory almost
fully assembled. all that is required to assemble
are the crank and handle.

to assemble your machine:

1. thread the crank handle into the small end of

the crank and tighten, as shown in

figure 6.

Mounting

once you have confirmed that your machine is
assembled and functioning properly, mount it to a
workbench through the holes in the base.

the strongest mounting option is a "through
Mount" where holes are drilled all the way through
the workbench, and hex bolts, washers, and
hex nuts are used to secure the slip roll to the
workbench.

-ACHINE

7ORKBENCH

7dai

;aViLVh]Zg

;aViLVh]Zg

AdX`LVh]Zg

=ZmCji

figure 8. example of a through mount setup.

-ACHINE

7ORKBENCH

AV\HXgZl

;aViLVh]Zg

figure 9. example of a direct mount setup.

another option for mounting is a "direct Mount"
where the machine is simply secured to the work-
bench with a lag screw.

figure 6. Crank assembly.

2. slide the crank onto the crank shaft until the

crank stops against the beveled shoulders of
the shaft. tighten the set screw to secure the
crank in place (

figure 7).

Crank

Crank handle

figure 7. Crank mounting.

Crank shaft

Crank

set screw