To initiate the power on sequence, To connect to the system console, To initiate the power – FUJITSU T1000 User Manual

Page 62

SPARC Enterprise T1000 Server Installation Guide • April 2007

▼

To Initiate the Power On Sequence

Powering on the system requires you to use the poweron command at the SC
console.

●

To initiate the power-on sequence, issue the poweron command.

You see an sc> alert message on the system console. This indicates that the system
has reset.

▼

To Connect to the System Console

Output from POST, OpenBoot, and the Solaris OS is displayed in the system console
using the console command on the system controller.

●

Execute the console command, and use the –f option to force the console to be
attached to your session.

Multiple users can be connected to the console, but only one can be attached.

sc> poweron

SC Alert: Host System has Reset

sc>

sc> console –f

(Enter #. to return to ALOM)