FUJITSU T5140 - Manual (Page 69)

53
OpenBoot Configuration Variables
This section supplies information about variables storing configuration on the SCC.
OpenBoot Configuration Variables on
the SCC
TABLE 1 describes the OpenBoot firmware configuration variables stored in
non-volatile memory on the system. The OpenBoot configuration variables are
printed here in the order in which they appear when you type the following
command:
ok printenv
TABLE 1 OpenBoot Configuration Variables Stored on the System Configuration Card
Variable Possible Values Default Value Description
local-mac-address? true, false true If true, network drivers use their own
MAC address, not the server MAC
address.
fcode-debug? true, false false If true, include name fields for plug-in
device FCodes.
scsi-initiator-id 0-15 7 SCSI ID of the serial attached SCSI
controller.
oem-logo? true, false false If true, use custom OEM logo.
Otherwise, use the server
manufacturer’s logo.
oem-banner? true, false false If true, use custom OEM banner.
ansi-terminal? true, false true If true, enable ANSI terminal
emulation.
screen-#columns 0-n 80 Sets number of columns on screen.
screen-#rows 0-n 34 Sets number of rows on screen.