FUJITSU T5140 - Manual (Page 63)

Handling Faults 47
▼ Enable ASR
1. At the -> prompt, type:
2. At the ok prompt, type:
Note – For more information about OpenBoot configuration variables, refer to the
service manual for your server.
3. To cause the parameter changes to take effect, type:
The system permanently stores the parameter changes and boots automatically
when the OpenBoot configuration variable auto-boot? is set to true (its default
value).
Related Information
■ “Automatic System Recovery” on page 46
■ “Disable ASR” on page 47
■ “View Information on Components Affected by ASR” on page 48
■ “OpenBoot Configuration Variables on the SCC” on page 53
▼ Disable ASR
1. At the ok prompt, type:
-> set /HOST/diag mode=normal
-> set /HOST/diag level=max
-> set /HOST/diag trigger=power-on-reset
ok setenv auto-boot true
ok setenv auto-boot-on-error? true
ok reset-all
ok setenv auto-boot-on-error? false