FUJITSU T5140 - Manual (Page 19)

Communicating With the System 3
Related Information
■ “ILOM Overview” on page 1
■ “Log In to the System Console” on page 3
▼ Log In to the System Console
1. “Log In to ILOM” on page 2 .
2. To access the system console from ILOM, type:
You are logged in to the system console. Perform tasks as needed.
Note – If the Solaris OS is not running, the system displays the ok prompt.
Related Information
■ “Display the ILOM ->Prompt” on page 4
■ “Use a Local Graphics Monitor” on page 5
▼ Display the ok Prompt
This procedure assumes the default system console configuration.
● Choose the appropriate shutdown method from the following table to reach the
ok
prompt.
-> start /SP/console
Are you sure you want to start /SP/console (y/n) ? y
Serial console started. To stop, type #.
.
.
.