Furuno GP-36 - Manual (Page 69)

SP - 2 E4399S02B
4. INPUT/OUTPUT DATA
(1) Data 1 Current Loop
Output Data: NMEA0183 Ver 1.5/2.0 selected
NMEA-REM1: GLL, GGA, VTG, ZDA, RMC, RMB
NMEA-REM2: GLL, GGA, VTG, ZDA, RMC, RMB, BWC,
RMA (Ver2.0), GTD (Ver1.5) when TD indication selected
NMEA-AP: GLL, VTG, ZDA, AAM, APB, BOD, BWC, XTE
(2) Data 2 RS-232C
Output Data: NMEA0183 Ver 1.5/2.0 selected
NMEA-REM: GLL, GGA, VTG, ZDA, RMC, RMB, BWC,
RMA (Ver2.0), GTD (Ver1.5) when TD indication selected
NMEA-AP: GLL, VTG, ZDA, AAM, APB, BOD, BWC, XTE
DGPS RTCM SC-104 (GP-36 only)
Downloading to PC (WP/ Route Data)
Input Data: DGPS RTCM SC-104 Ver 2.1
Uploading from PC (WP/ Route Data)
NMEA WPL (WP Data)
5. POWER SUPPLY
(1) GP-31 12-24 VDC: 0.12-0.06 A (at max. level dimmer)
(2) GP-36 12-24 VDC: 0.23-0.12 A (at max. level dimmer)
6. ENVIRONMENTAL CONDITION
(1) Ambient Temperature Antenna Unit: -25°C to +70°C
Display Unit: -15°C to +55°C
(2) Relative Humidity 95% at 40°C
(3) Water proofing Antenna Unit: IEC60529 IPX6
Display Unit: IEC60529 IPX5 (USCG CFR-46)
(4) Vibration ±1 mm ±10%, 2(5) to 13.2 Hz,
Maximum acceleration 7 m/s
2
, 13.2 to 100 Hz (IEC 60945)
7. COATING COLOR
(1) Display Unit Cover: Munsell 2.5GY5/1.5, Panel: N3.0
(2) Antenna Unit N9.5