6 clearing data – Furuno GP-36 User Manual
Page 58
8-4
8.6 Clearing Data
You may clear GPS data, menu settings
and all backup data to start afresh.
1. Press the [MENU] key once or twice to
open the menu.
2. Select ERASE and press the [ENT] key.
3. Select GPS DATA?, MENU SETTINGS,
or ALL BACKUP DATA as appropriate
and press the [ENT] key. One of the fol-
lowing messages appears.
Figure 8-9 Prompt for erasure of GPS
data, menu settings, backup data
4. Press the [ENT] key. The following dis-
play appears.
Figure 8-7 Prompt for restarting
5. Hit any key to erase item selected. A
beep sounds while the selected item is
being erased, and then the plotter dis-
play appears.
See also other documents in the category Furuno GPS receiver:
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- CH-300 (124 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-3500 (192 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-33 (98 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- RP-250 (73 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1600F (97 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-150-DUAL (123 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)