Furuno GP-36 - Manual (Page 27)

3-5
3.5 Deleting Waypoints
1. Press the [MENU] key once or twice to
display the menu.
2. Select ERASE and press the [ENT] key.
Figure 3-14 ERASE menu
3. The cursor is on the “WAYPOINTS/
MARKS?” field. Press the [ENT] key.
Figure 3-15 ERASE WP/MRK display
4. Select the waypoint you want to erase.
Note: You cannot erase CURSOR,
MOB or START.
5. Press the [ENT] key. A screen showing
position and other particulars of the
waypoint selected appears.
Figure 3-16 ERASE prompt
6. Select “ERASE?” and press the [ENT]
key.
7. Press the [MENU] key twice to finish.