Furuno GP-36 - Manual (Page 5)

iii
TABLE OF CONTENTS
FOREWORD ........................................... iv
SYSTEM CONFIGURATION ............... v
EQUIPMENT LISTS .............................. vi
1. OPERATIONAL OVERVIEW
1.1 Control Description ............................. 1-1
1.2 Turning On and Off the Power ............ 1-2
1.3 Adjusting Display Dimmer
and Contrast ....................................... 1-2
1.4 Display Modes .................................... 1-3
1.5 Basic Menu Operation ........................ 1-7
1.6 Simulator Display ................................ 1-8
2. PLOTTER DISPLAY
OVERVIEW
2.1 Enlarging/Shrinking the
Display Range ..................................... 2-1
2.2 Shifting the Cursor .............................. 2-1
2.3 Shifting the Display ............................. 2-2
2.4 Centering Own Ship’s Position ........... 2-2
2.5 Changing Track Plotting Interval,
Stopping Plotting of Track ................... 2-2
2.6 Erasing Track ...................................... 2-3
3. WAYPOINTS (MARKS)
3.1 Entering Waypoints ............................. 3-1
3.2 Entering the MOB Mark ...................... 3-3
3.3 Displaying Waypoint Name ................. 3-4
3.4 Editing Waypoints on the
WPTS/MRKS List ................................ 3-4
3.5 Deleting Waypoints ............................. 3-5
4. ROUTES
4.1 Creating a Route ................................. 4-1
4.2 Editing Routes ..................................... 4-4
4.3 Deleting a Route ................................. 4-6
5. NAVIGATION
5.1 Setting Destination by Cursor ............. 5-1
5.2 Setting Destination by Waypoint ......... 5-1
5.3 Setting Route as Destination .............. 5-2
5.4 Canceling Destination ......................... 5-2
6. ALARMS
6.1 Arrival Alarm, Anchor Watch Alarm ..... 6-1
6.2 XTE (Cross Track Error) Alarm ........... 6-2
6.3 Speed Alarm ....................................... 6-3
6.4 DGPS Alarm ........................................ 6-3
6.5 Time Alarm .......................................... 6-3
6.6 Trip Distance Alarm ............................. 6-4
6.7 Buzzer Type Selection ........................ 6-4
7. OTHER FUNCTIONS
7.1 Calculating Range, Bearing and TTG . 7-1
7.2 DGPS Setup, DGPS Data .................. 7-2
7.3 Bearing Reference .............................. 7-5
7.4 Magnetic Variation .............................. 7-5
7.5 Geodetic Chart System ....................... 7-6
7.6 Units of Measurement ......................... 7-6
7.7 Position Display Format ...................... 7-6
7.8 Time Difference (using local time) ...... 7-7
7.9 GPS Setup .......................................... 7-7
7.10 User Display Setup ........................... 7-9
7.11 Resetting Trip Distance ................... 7-10
7.12 Uploading, Downloading Waypoint,
Route Data ...................................... 7-10
7.13 Time Display ................................... 7-14
8. MAINTENANCE &
TROUBLESHOOTING
8.1 Maintenance ....................................... 8-1
8.2 Displaying the Message Board ........... 8-1
8.3 Displaying the GPS
Satellite Monitor Display ..................... 8-2
8.4 Diagnostic Test .................................... 8-2
8.5 When “BATTERY ALARM!” Appears .. 8-3
8.6 Clearing Data ...................................... 8-4
9. INSTALLATION
9.1 Installation of Display Unit .................. 9-1
9.2 Installation of Antenna Unit ................. 9-1
9.3 Wiring .................................................. 9-2
9.4 Initial Settings ...................................... 9-3
APPENDIX
Menu Tree .............................................. AP-1
Loran C Chains ...................................... AP-3
Decca Chains ......................................... AP-4
Geodetic Chart List ................................ AP-5
SPECIFICATIONS ............................ SP-1
OUTLINE DRAWING ......................... D-1
INTERCONNECTION DIAGRAM .. S-1
INDEX .............................................. Index-1
Declaration of Conformity (GP-31, GP-36)