Furuno GP-36 - Manual (Page 40)

6-4
6.6 Trip Distance Alarm
This alarm alerts you by aural and visual
alarms when your boat has traveled a
greater distance than the preset trip alarm
distance.
1. Press the [MENU] key once or twice to
open the menu.
2. Select ALARMS.
3. Press the [ENT] key.
4. Select the TRIP field and press the
[ENT] key.
5. Select ON or OFF as appropriate and
press the [ENT] key.
6. For ON, press the [ENT] key again.
7. Enter distance desired (range: 1-999
nm) with the cursor pad.
8. Press the [ENT] key.
9. Press the [MENU] key twice to finish.
When the boat has traveled further than the
preset trip distance, the buzzer sounds and
the message TRIP ALARM! and the alarm
icon appear. To disable the trip alarm se-
lect OFF at step 5.
6.7 Buzzer Type Selection
The buzzer sounds whenever an alarm
setting is violated. You can select the type
of buzzer to use as follows:
1. Press the [MENU] key once or twice to
open the menu.
2. Select ALARMS.
3. Press the [ENT] key.
4. Select the BUZZER field and press the
[ENT] key. The following display ap-
pears.
Figure 6-7 Buzzer type selection window
5. Select buzzer type desired and press
the [ENT] key.
SHORT: Two short beeps
LONG: Three long beeps
CONSTANT: Continuous beeps
6. Press the [MENU] key twice to finish.