Furuno DUAL GPS GP-150-DUAL - Manual (Page 64)

8. MENU SETTINGS
8-12
Rate
Edit=DGPS station: 17
MENU : Escape ENT : Enter
: Column
Position
200 bps
34 44’N 135 21’W
FREQ 3 20. 5 kHz
: Cursor
Figure 8-28
7) Edit data, and then press the NU/CU
ENT key.
8) After displaying the message “Are you
sure to change?”, press the NU/CU ENT
key. The DGPS Station (User) list
appears after the message “Please Wait”.
9) Press the MENU/ESC key.
Erasing individual DGPS station
1) Press MENU ESC, 9 and 7 to display the
WAAS/DGPS SETUP menu.
2) Press to select DGPS Station.
3) Press to select List to show the
Station Nearest list.
4) Press or to select USER Setup,
and then press to go to the DGPS
Station (USER) list.
5) Press or to select the station from
the list, and then press the CLEAR key.
The message “Are you sure to erase?”
appears.
6) Press the NU/CU ENT key. If cacelling,
press the MENU/ESC key.
7) Press the MENU/ESC key.
8.7 GPS Monitor Display
Three GPS monitor displays provide GPS
information:
• Satellite monitor which shows position of
GPS satellites
• DGPS INTEGRITY STATUS which
displays DGPS beacon station information
•
DGPS beacon station message monitor
which displays messages received from
beacon stations
To display the GPS monitor displays;
1) Press MENU ESC, 7.
2) Press
to choose the GPS monitor
you want to view.
3) Press the MENU ESC key to escape.