Configuring the fieldserver as a fins client, Data arrays/descriptors – FieldServer Omron FINS FS-8704-16 User Manual
Page 9

FS-8704-16 Omron FINS Manual Page 9 of 38
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
CONFIGURING THE FIELDSERVER AS A FINS CLIENT
4
For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The 
information that follows describes how to expand upon the factory defaults provided in the configuration files 
included with the FieldServer (See “.csv” sample files provided with the FieldServer). 
This section documents and describes the parameters necessary for configuring the FieldServer to communicate 
with a FINS Server. As a Client this driver reads and writes data to Server Nodes. Server nodes should be FINS 
capable and be configured to communicate over FINS
4.1
Data Arrays/Descriptors
The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order to enable 
the FieldServer for FINS communications, the driver independent FieldServer buffers need to be declared in the 
“Data Arrays” section, the destination device addresses need to be declared in the “Client Side Nodes” section, and 
the data required from the servers needs to be mapped in the “Client Side Map Descriptors” section. Details on 
how to do this can be found below. 
Note that in the tables, * indicates an optional parameter, with the bold legal value being the default.
Section Title 
Data_Arrays 
Column Title 
Function
Legal Values
Data_Array_Name
Provide name for Data Array
Up to 15 alphanumeric characters
Data_Array_Format
Provide data format. Each Data Array can only 
take on one format. 
Float,
Bit,
UInt16,
SInt16,
Packed_Bit, Byte, Packed_Byte, 
Swapped_Byte 
Data_Array_Length
Number of Data Objects. Must be larger than 
the data storage area required by the Map 
Descriptors for the data being placed in this 
array. 
1-32767
Example
// Data Arrays
 
Data_Arrays 
Data_Array_Name
,Data_Format
,Data_Array_Length,
DA_CIO
,UInt16
,5143
DA_WR
,UInt16
,511
DA_HR
,Uint16
,511
DA_DM
,Uint16
,32767
