FieldServer Omron FINS FS-8704-16 - Manual (Page 6)

FS-8704-16 Omron FINS Manual Page 6 of 38
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
HARDWARE CONNECTIONS 3
The FieldServer is connected to the PLC as shown in connection drawing.
Configure the PLC according to manufacturer’s instructions to work with other FINS supported device.
BASE NAME:
FILE NAME:
FIELDSERVER
OMRONFINS
CONNECTION DIAGRAM
DATE: 5/04/04
BY: MC
(408)-262-2299
PLC
Ethernet Interface
FS-8915-10
FS-8915-10
SITE
ETHERNET
OR
Connection using Standard
Network Devices and Cable
Segments.
Direct Connection using
Crossover Cable
3.1 Hardware Connection Tips / Hints
If communication doesn’t start check the following.
Are the FieldServer and PLC on the same network?
Are all intended Nodes configured to communicate on FINS?
Are all FINS Nodes configured to use the same Port Number?
Is the Network healthy?