Appendix a.2. plc status to execute commands – FieldServer Omron FINS FS-8704-16 User Manual
Page 24

FS-8704-16 Omron FINS Manual Page 24 of 38
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
Appendix A.2. PLC status to execute commands
PLC Type
Memory
Type
Command name
Run
Mode
Monitor
Mode
Program
Mode
Access right
5
UM Read
Protection6
DIP UM Protection7
CS1/CJ1 Series
I/O Memory
MEMORY
AREA
READ
OK
OK
OK
OK
OK
OK
MEMORY
AREA
WRITE
OK
OK
OK
OK
OK
OK
Operating
Mode
Changes
RUN
OK
OK
OK
Disabled
OK
OK
STOP
OK
OK
OK
Disabled
OK
OK
Time
Data
Access
CLOCK READ
OK
OK
OK
OK
OK
OK
CLOCK WRITE
OK
OK
OK
Disabled
OK
OK
Status
Reading
CPU UNIT STATUS
READ
OK
OK
OK
OK
OK
OK
CYCLE TIME READ
OK
OK
Disabled
OK
OK
OK
5
Access Right at Other Device: The Access right at other device column tells whether the CPU Unit can or cannot receive a command when another device has
the access right to the CPU Unit.
6
UM Read Protection: The UM read protection column tells whether the CPU Unit can or cannot receive the command when UM (user memory) is protected
from a Peripheral Device.
7
DIP Switch UM Protection: The DIP switch UM protection column tells whether the CPU Unit can or cannot receive a command when UM is write-protected
by turning ON pin 1 of the DIP switch on the CPU Unit’s front panel.