FieldServer Omron FINS FS-8704-16 - Manual (Page 10)

FS-8704-16 Omron FINS Manual Page 10 of 38
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
4.2 Driver Specific FieldServer Parameters
Section Title
FieldServer
Column Title
Function Legal Values
Title Name for FieldServer Text
System_Node_Id
Specify physical node Id on network.
This is the last byte of the IP Address of
the FieldServer. eg. If FieldServer’s IP
Address is 192.168.1.81 then this
parameter should be set to 81
1-126
Example
// FieldServer Driver specific parameters
FieldServer
Title ,System_Node_Id
Fins Client ,81
4.3 Client Side Connection Descript ors
Section Title
Adapter
Column Title
Function Legal Values
Adapter Adapter Name N1, N22
Protocol Specify protocol used Fins, omn_fins or fins_udp
Udp_port_number Specify UDP port number 0, 9600 etc.
Example
// Client Side
Connections
Adapters
Adapter ,Protocol ,Udp_port_number
N1 ,Fins ,9600
2 Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for
details of the ports available on specific hardware.