FUJITSU FTP604 User Manual
Page 29
12-02-2003
Page 3-29 of
- 3-29 -
51
Decimal 27
104 n
[Description]
N represents the new baud rate, legal values
for n = 1 to 255. The baud rate is calculated
as 921600/n = new baud rate.
For instance 921600/8 = 115200baud.
The value is saved to the flash
3.8.37 Change form feed time
[Name]
Change form feed time
[Format]
ASCII
ESC i
n
Hex
1B 69
n
Decimal 27
105 n
[Description]
N represents the time between that the
board registry incoming paper, and to it
starts feed the auto form feed length. The
time is calculated as n * 50msec. The default
setting is 2 seconds. The value is saved to
flash. Legal values for n are between 1 and
255.
3.8.38 Feed Paper
[Name]
Feed Paper
[Format]
ASCII
GS n
Hex
1D n
Decimal
29
n
[Range]
n: [-128;127]
[Description]
When the printer controller receives this command the
paper will be fed n-dot lines. If the value is negative a
reverse form feed will be made.
3.8.39 Compensate Burn time
[Name]
Compensate burn time
[Format]
ASCII
RS n
Hex
1E n
Decimal
30
n
[Range]
n: [-15;15]
[Description]
When the printer controller receives this command the
burn time will be compensated. If a negative value is
send the printout intensity will be lighter and if a positive
value is send the printout intensity will be darker.