FUJITSU FTP604 - Manual (Page 16)

12-02-2003
Page 2-16 of
- 2-16 -
51
Specifications
Default settings
Interface Serial RS232C, USB or IRDA
Data format serial
115.200 baud, 8 data bit, none parity, 1 stop bit, hardware
handshake.Baud rate can be changed by software.
Data format USB
USB Printer class specification.
http://www.usb.org/developers/data/devclass/usbprint11.pdf
Data format IRDA
IRDA (Ircomm specifications)
http://www.irda.org/standards/pubs/ircomm10.pdf
Command set I/F-com
Transmission to host Requested status etc.
Printer supply 18V to 24V DC
Power on self test Feed
Voltage compensation Burn time
Current consumption
Operating 130mA, Printing up to XA @ 24V (TBD)
Printing speed 50mm/sec FTP624MCLxxx, 40mm/sec FTP634MCLxxx
Fontset Western (Code 850, char 32-159)
Character size 8x14, 8x28, 16x14, 16x28, 16x56, 32x28, 32x56, 64x112
Character type Normal, Bold, Underline, Italic, Reverse (white on black)
Default font 16x28
Paper detect Digital
Graphics Normal / Compressed
Auto load 80mm
Form feed 50mm
Line feed LF
Maximum dimensions Width 77mm, Depth 50mm, Connected height 15mm
Mounting holes
Width 71mm, Depth 44mm, Diameter 3.3mm
Connectors TBD
Weight 25g
Temperature Storage -40ºC to +85ºC 0-90 Operating 0C to +85ºC 10-90%RH
Shock 100G XYZ
EMC Emission: E-Field EN50081-1-1, Conducted EN50081-1-2
Immunity: E-field EN50082-1-1, Conducted EN50082-1-2, Over voltage EN50082-1-3
ESD Contact discharge 4kV, air discharge 8kV
Drivers Windows 9x, Windows CE, Windows NT, Linux, Windows2000 and Windows XP
Approvals CE, UL
Accessories Serial Interface cable: CBL-002, 9pol SubD, female
Power cable: CBL-022