FUJITSU FTP604 User Manual
Page 23
12-02-2003
Page 3-23 of
- 3-23 -
51
[Description]
Turns the barcode on until non-barcode character
received.
[Barcode char.] Space , $ , % , * , + , - , . , / , 0-9 , A-Z
[Notes]
The barcode 39 must start and end with the character
‘*’. This character is the start and stop character in
barcode 39, and the ‘*’ can only be used as start and
end character.
If the barcode length exceeds the paper size the last
barcode character will not be written as barcode. In that
case the barcode cannot be read because the last
character will not be ‘*’
3.8.11 Feed Forward
[Name]
Feed Forward
[Format]
ASCII
FF
Hex
0C
Decimal
12
[Description]
When this command is received the printer will print
whatever data it has in the buffer and feed forward
50mm
3.8.12 Reverse off
3.8.13 [Name]
Reverse off
[Format]
ASCII
SO
Hex
0E
Decimal
14
[Description]
This command will switch off reverse printing
3.8.14 Reverse on
[Name]
Reverse on
[Format]
ASCII
SI
Hex
0F
Decimal
15
[Description]
This command will switch on reverse printing
3.8.15 Underline off
[Name]
Underline off
[Format]
ASCII
DLE