First Virtual Communications 1150E - Manual (Page 89)

IP Phone 1150E non-ACD call features
89
Transferring a call
Use the Transfer feature to redirect a call to a third party.
To use the Transfer feature:
To go back to the original call if the transfer is incomplete:
1. Press the Transfer Key. The other party
is on hold and you receive a dial tone.
The screen displays Call on hold, dial
number.
2. Dial the number of the phone where the
call is to be transferred.
or
3. Press the Swap Key to switch between
talking with the original caller and the
new caller. Press the
Connect Key to
complete the transfer. The two callers
are connected and your phone is ready
to make or receive new calls.
1. Press the Goodbye key. The caller
remains connected to the attendant.
2. Press the Individual Line (DN) Key with
the flashing icon to return to your original
call
.
Trans
Swap
Connect
2493