FUJITSU Eturneus Disk Storage System (ISCSI) for VMware ESX - Manual (Page 26)

4 Execute the following command in the terminal:
esxcli corestorage claimrule run
5 Check that the connected ETERNUS DX Disk storage system is shown when the appropriate command is
executed in the terminal:
Command
esxcli nmp satp listrules --satp VMW_SATP_ALUA
Display result
• When connecting to an ETERNUS DX60/DX60 S2, DX80/DX80 S2, or DX90 S2
VMW_SATP_ALUA FUJITSU ETERNUS_DXL tpgs_on ETERNUS_DXL with ALUA
• When connecting to an ETERNUS DX400/DX400 S2 series
VMW_SATP_ALUA FUJITSU ETERNUS_DX400 tpgs_on ETERNUS_DX400 with ALUA
• When connecting to an ETERNUS DX8000/DX8000 S2 series
VMW_SATP_ALUA FUJITSU ETERNUS_DX8000 tpgs_on ETERNUS_DX8000 with ALUA
6 Log out of the terminal, and restart the VMware ESX server.
Refer to the following for details of the above commands:
• Reference URL:
http://www.vmware.com/support/pubs/
• Reference documents:
"vSphere Command-Line Interface Concepts and Examples"
Chapter 6 Setting Up the VMware ESX Server
6.1 For VMware vSphere
26
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware ® ESX
Copyright 2013 FUJITSU LIMITED
P3AM-3412-13ENZ0