FUJITSU Eturneus Disk Storage System (ISCSI) for VMware ESX - Manual (Page 23)

7 Confirm that a virtual switch and VMkernel are set for each vmnic.
6.1.4 Setting the Software Initiator
Enable Software Initiator in VMware ESX.
6.1.4.1 For the ETERNUS DX Disk storage system
1 Select the [Configuration] tab on vSphere Client and click [Storage Adapters].
2 Select the target iSCSI Software Adapter and click [Properties...].
3 Click [Configure] on the [General] tab.
4 Select the [Status-Enabled] checkbox and click the [OK] button.
Chapter 6 Setting Up the VMware ESX Server
6.1 For VMware vSphere
23
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware ® ESX
Copyright 2013 FUJITSU LIMITED
P3AM-3412-13ENZ0