FUJITSU Eturneus Disk Storage System (ISCSI) for VMware ESX - Manual (Page 22)

6.1.3 Creating the Virtual Switches
Add two virtual switches (vSwitch) for iSCSI to VMware ESX. Add a "VMkernel" and "vmnic" for each vSwitch.
Perform the following procedure to each vmnic that configures iSCSI SAN.
1 Open the network window by selecting the [Configuration] tab on vSphere Client and click [Add Net-
work] in the upper right of the window.
2 Select [VMkernel] and click the [Next] button.
3 Select the checkbox of the target network adapter and click the [Next] button.
4 Set properties of port groups as required, and click the [Next] button.
5 Set the IP address and subnet mask of "VMkernel", and click the [Next] button.
6 Repeat Step 1 through Step 5 to add another virtual switch (vSwitch2).
Chapter 6 Setting Up the VMware ESX Server
6.1 For VMware vSphere
22
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware ® ESX
Copyright 2013 FUJITSU LIMITED
P3AM-3412-13ENZ0