FUNAI DRV-B2734 - Manual (Page 34)

34
Reco
rd
ing
EN
10
Press [DUBBING].
DVD to VCR duplication will start.
11
Press [STOP
S] to stop the
recording.
Note
• When you turn off the unit after setting the Dubbing
Mode to DVD →VCR, the setting will be set to
VCR →DVD automatically.
• Dubbing Mode is available only if the tape or disc is
not copy protected.
• You cannot change the output mode during VCR to
DVD or DVD to VCR duplication.
Setting a disc to protect
To prevent accidental over-recording, editing or
erasing of recordings, you can protect them using the
Setting menu.
Insert a recordable disc.
1
In stop mode, press [SETUP].
“Easy Setting Menu” or “Advanced Setting Menu”
will appear.
2
Select “Disc” using [Cursor
U / D],
then press [ENTER].
3
Select “Disc Protect OFF
→ ON”
using [Cursor
U / D], then press
[ENTER].
4
Select “Yes” using [Cursor
U / D],
then press [ENTER].
The disc is protected.
Note
• The Disc Protect setting is available only when a
disc recorded in VR mode is inserted.
• You can select only “Disc Protect ON → OFF” when
a protected disc is inserted.
To cancel the disc protect:
• Select “Disc Protect ON → OFF” at step 3, then
select “Yes.”
• If you insert a disc protected with this unit, “Disc
Protect ON → OFF” will appear instead of “OFF →
ON.”
Finalising discs
You will need to finalise discs to play them back in
other players.
Finalising may take from several minutes up to an
hour. (A disc recorded in Video mode can take up to
15 minutes. A disc recorded in VR mode can take up
to 60 minutes.)
A shorter recording period on the disc will require a
longer time period for finalisation. Do not unplug the
mains cable during finalisation.
Insert a recordable disc before
finalising.
1
In stop mode, press [SETUP].
“Easy Setting Menu” or “Advanced Setting Menu”
will appear.
2
Select “Disc” using [Cursor U / D],
then press [ENTER].
3
Select “Finalise” using
[Cursor
U / D], then press [ENTER].
4
Select “Yes” using [Cursor U / D],
then press [ENTER].
Finalising will start.
To cancel finalising (DVD-RW only):
At step 4, press [STOP S], select “Yes,” then
press [ENTER]. Finalising is cancelled and the
unit switches to stop mode.
DVD-RW DVD-RW
VR
DVD-RW DVD-RW
Video
DVD-RW DVD-RW
VR
DVD-R DVD-R
Finalize
Yes
No
Yes
Finalise
Yes
No
Yes
DVD
Finalising 10%
Do you want to cancel ?
Yes No Yes
DRV_B2737_B2734.book Page 34 Thursday, March 31, 2005 10:04 PM