FUJITSU MCJ3230SS - Manual (Page 86)

Host Interface
4-12 C156-E224-01EN
Table 4.6 INQUIRY command response data
Bit
Byte
7 6 5 4 3 2 1 0
Device classification code
(000b)
Device Type
0
"7Fh" when a value other than 0 is specified for LUN
1
RMB
"1h"
Reserved
2 ISO Version "0h" ECMA Version "0h" ANSI Version "2h"
3 Reserved Response data format (2h)
4 Additional length (2Bh)
5-6 Reserved
7 RelAdr '0'
WBus3
2 '0'
Wbus16
'0'
Sync '1' Linked '0' '0'
CmdQue
'0'
SftRe
'0'
8-15
Vendor Information
"FUJITSU" (in ASCII)
Left justified. The rightmost data area not used is padded with spaces. (20h)
16-31
Product Information
"MCJ3230SS" (in ASCII)
Left justified. The rightmost data area not used is padded with spaces. (20h)
32-35
Firmware Revision Level
"0000"-"999z" (in ASCII)
36
Firmware Local Revision
00h-FFh (in HEX)
37
Boot Firmware Revision Level
00h-FFh (in HEX)
38-39 Signature "MO" (in ASCII)
40-47 Factory Information
The Factory Information is the data that is provided for use at the factory. The
data value may vary depending on the device. Therefore, INIT should not have an
expected value. Normally, return 0.