FUJITSU MCJ3230SS - Manual (Page 38)

Specifications
2-4 C156-E224-01EN
2.1.3 Environmental and power requirements
Table 2.3 lists the environmental and power requirements.
Table 2.3 Environmental and power requirements (1 of 2)
Item Specification
Power
requirements Average +5 VDC±5%, 1.4 A (2.5 A Max.) *1
Ripple requirement 100mV P-P (DC-1 MHz)
Ready (active mode) 4.8 W (typical) *2
Random seek, read/ write 6.5 W (typical) *2
Physical Format 7.3 W (typical) *2
Power
consumption
(Average)
Power save mode
Pre-idle mode
Idle mode
Standby mode
4.0 W (typical) *2
2.0 W (typical) *2
1.0 W (typical) *2
With panel 101.6
Ч 150.0 Ч 25.4 mm Dimensions
(W
×D×H)
Without panel 101.6
Ч 148.4 Ч 25.4 mm
Weight 480 g (with panel)
Environmental
requirements Operating Temperature: 5 to 45°C *3
(gradient 15°C /h or less)
Relative humidity: 10 to 85% (Noncondensing)
Max. wet bulb temperature:
29°C or lower
Non Operating Temperature: 0 to 50°C
Relative humidity: 10 to 85% (Noncondensing)
Max. wet bulb temperature:
36°C or lower
Transport Temperature: -40 to 60°C (24 hours or less)
Temperature: -20 to 60°C (24 hours or more)
Relative humidity: 5 to 90% (Non condensing)
Max. wet bulb temperature:
41°C or lower
Installation Tilt angle -5° to +10° *3
Vibration/
shock Operating 3.9 m/s 2 (5 to 500 Hz, sine sweep)
1.96 m/s 2
(5 to 500 Hz, sine sweep AV record/play)
Shock 19.6 m/s 2 (10ms, half-sine pulse)
Non Operating
No cartridge, power ON 9.8 m/s 2 (5 to 500 Hz, sine sweep)
Shock 49 m/s 2 (10 ms, half-sine pulse)
Transport Shock 490 m/s 2 (10 ms, half-sine pulse)
Requirement: Packing conditions specified by
Fujitsu