FUJITSU MPG3XXXAH-E - Manual (Page 124)

C141-E116-01EN 5 - 57
*7 Off-line data collection status
Values Description
00h or 80h Off-line data collection is not started.
01h or 81h Reserved
02h or 82h Off-line data collection has been completed without error.
03h or 83h Reserved
04h or 84h Off-line data collection has been suspended by an interrupt
command from the host.
05h or 85h Off-line data collection has been aborted by an interrupt command
from the host.
06h or 86h Off-line data collection has been aborted with a fatal error. (Not
used)
40h to 7Fh
C0h to FFh
Vendor unique (Not used)
07h to 3Fh
87h to BFh
Reserved
If bit [7] is 1, it indicates that automatic off-line data collection function is enabled.
*8 Self Test execution status byte [16Bh]
Bit 0-3: Self Test remain time.
The values in these bits indicate the remaining percentage (0% - 90%) of Self Test until
completion by 0h-9h.
Bit 4-7: Self Test execution status
00h: Self Test has been completed normally. Otherwise Self Test has not
performed.
01h:
Self Test has been interrupted by host.
02h: Self Test has been interrupted by the soft/hard reset from the host.
03h: Self Test has been aborted for a final error.
04h: Self Test has been completed abnormally for an unknown meaning.
05h: Self Test has been completed abnormally by Write/Read Test.
06h: Self Test has been completed abnormally by servo analysis.
07h: Self Test has been completed abnormally by Read Scan Test
08h-0Eh: Reserved
0Fh: Self Test is being performed.