beautypg.com

2 display options menu, Display setup 1 menu description – Furuno GP-1850WF User Manual

Page 75

background image

11. CUSTOMIZING YOUR UNIT

11-3

11.2 DISPLAY

OPTIONS

menu

This menu, consisting of two pages, display
setup1 and display setup 2, contains items
for setting up the plotter and video sounder
displays.

1. Press the [MENU] key.
2. Press the DISPLAY OPTIONS soft key.

The display setup1 menu appears.

DGPS 3D

DISPLAY

SETUP1

RETURN

EDIT

RNG & BRG MODE
RANGE/SPEED UNIT
DEPTH UNIT
TEMP UNIT
LAT/LON DISPLAY
TIME DISPLAY
WAYPOINTS SW
COURSE VECTOR
BEARING
MAG VARIATION
TD DISPLAY
POSITION DISPLAY
SET GO TO METHOD
OPERATION MODE
LANGUAGE

RHUMB LINE
nm / kt
ft

°

F

DD

°

MM.MMM'

24 HOUR
AUTO2
LINE
MAGNETIC
AUTO 01.3

°

E

LORAN C
LAT/LON
1 POINT
PLEASURE
ENGLISH

NEXT
PAGE

Display setup 1 menu

DISPLAY SETUP 1 menu description

RNG & BRG MODE

The GPS receiver calculates the range,
bearing, cross track error (XTE) and ETA to
TO waypoint when you set a destination.
The range and bearing can be calculated by
GREAT CIRCLE (straight line between two
points) or RHUMB LINE (straight line
between two points on nautical chart)
method.

RANGE/SPEED UNIT

Selects the unit for range and speed; nm/kt,
km/ km/h, sm/ sm/h.

DEPTH UNIT

Selects unit of depth measurement among
feet, fathoms, and meters.

TEMP UNIT

Selects unit of water temperature
measurement between Celsius and
Fahrenheit.

LAT/LON DISPLAY

Displays the minutes of latitude and
longitude positions in hundredths,
thousandths or ten thousandths.

TIME DISPLAY

Selects time display format for 12 hour or 24
hour.

WAYPOINT SW

Provides automatic or manual waypoint
switching when following a route. For further
details, see page 8-5.

COURSE VECTOR

You may extend a line from the own ship
position to show ship’s course. The line can
be a vector (the length depends on the ship’s
speed) or course bar (course bar).

BEARING

A navigation device outputs both true and
magnetic bearings. A magnetic bearing is
true bearing plus (or minus) earth’s magnetic
deviation. Thus the equation for finding
magnetic bearing is;

true bearing

±

x (magnetic variation)° =

magnetic bearing

You can display your ship’s course and
bearing to waypoint in true or magnetic
bearing.