Furuno GP-1850WF - Manual (Page 50)

6. WAYPOINTS
6-4
Entering waypoints by latitude and
longitude position
1. Press the [WPT/RTE] key to open the
WAYPOINT & ROUTE menu.
2. Press the WAYPOINTS soft key to open
the WAYPOINT menu.
3. Press the LOCAL LIST (lists waypoints in
order from nearest to furthest) or
ALPHA/NUMERIC LIST (lists waypoints
in alphanumeric order) soft key.
DGPS 3D
ABCDEFGHIJKL
FISH01
WPT
LOCAL
RETURN
GO TO
NEW
WPT
EDIT
WPT
ERASE
WPT
BRG. 23.8 °
RNG. 1.75nm
33 ° 12.345' N
135 ° 23.456' W
WPT001
12:30 29SE97
BRG. 90.0 °
RNG. 2.51nm
33 ° 23.456' N
135 ° 23.567' W
ABCDEF
15:21 01OCT97
BRIDGE
16:45 01OCT97
BRG. 180.0 °
RNG. 5.07nm
34 ° 12.345' N
135 ° 54.321' W
34 ° 12.345' N
135 ° 54.321' W
BRG. 359.9 °
RNG. 8.01nm
Local list
DGPS 3D
WPT
ALPHA
RETURN
GO TO
NEW
WPT
EDIT
WPT
ERASE
WPT
ABCDEFGHIJKL
FISH01
BRG. 23.8 °
RNG. 1.75nm
33 ° 12.345' N
135 ° 23.456' W
WPT001
12:30 29SE97
BRG. 90.0 °
RNG. 2.51nm
33 ° 23.456' N
135 ° 23.567' W
ABCDEF
15:21 01OCT97
BRG. 180.0 °
RNG. 5.07nm
34 ° 12.345' N
135 ° 54.321' W
BRIDGE
16:45 01OCT97
34 ° 12.345' N
135 ° 54.321' W
BRG. 359.9 °
RNG. 8.01nm
SEARCH FOR _ _ _
Search window
Alphanumeric list
4. Press the NEW WPT soft key to show the
waypoint window. Own ship’s position is
shown. Change the data similar to how
you did in “Entering waypoints by the
cursor.”
5. Press the SAVE soft key.
6.2 Erasing Individual
Waypoints
Individual waypoints can be erased by the
cursor or through the waypoint list.
Erasing waypoints by the cursor
1. Press the cursor pad to turn on the
cursor.
2. Operate the cursor pad to place the
cursor on the waypoint you want to erase.
A flashing diamond mark appears over
the waypoint when it is correctly selected.
3. Press the [CLEAR] key. You are asked if
you are sure to erase the waypoint.
4. Press the [ENTER] key. The waypoint is
erased from both the plotter screen and
the waypoint list.
Erasing waypoints through the
waypoint list
1. Press the [WPT/RTE] key to open the
WAYPOINT & ROUTE menu.
2. Press the WAYPOINTS soft key to open
the WAYPOINTS menu.
3. Press the LOCAL LIST or
ALPHA/NUMERIC LIST soft key.
4. Press ▲ or ▼ to select the waypoint you
want to erase.
5. Press the ERASE WPT soft key. You are
asked if you are sure to erase the
waypoint.
6. Press the [ENTER] key. The waypoint is
erased from both the waypoint list and
the plotter screen.