beautypg.com

4 following a route, Navigate route waypoints in reverse order, Navigate directly to a route waypoint – Furuno GP-1850WF User Manual

Page 62: Navigate along specific leg of route, Restarting navigation, Log display 4. press the restart soft key, Navigation, Fish

background image

8. NAVIGATION

8-4

8.4

Following a Route

1. Press the [WPT/RTE] key followed by the

ROUTE soft key to open the route list.

2. Press ▲ or ▼ to select a route.
3. Press the GO TO soft key to show the

plotter display.

DGPS 3D

RETURN

WPT

FROM
OS

FISH

1.3 nm
208.5

°

ZOOM
IN

ZOOM
OUT

GO TO
WPT

RVSE
ROUTE

GO TO
ROUTE

WP-002

WP-001

FISH

CRAB

Plotter display, route selected as destination


The cursor is on the route waypoint nearest
own ship.

4. Operate the cursor pad to place the

cursor on the waypoint or leg desired in
the route.

5. Press the GO TO WPT or FOLLOW LEG

soft key (depending on the choice made
at step 4).


Green lines connect all route waypoints and
arrows on the lines point in the direction to
traverse the route.

Navigate route waypoints in reverse
order

Press the RVSE ROUTE soft key to reverse
the order to traverse waypoints. The arrows
on the route line point in the direction
selected.

Navigate directly to a route waypoint

If you want to go directly to a route waypoint,
place the cursor on the waypoint to show the
flashing diamond, and then press the GO TO
WPT soft key.

Navigate along specific leg of route

Place the cursor on the leg to display it in a
white and red flashing line, and then press
the FOLLOW LEG soft key.

Restarting navigation

When you steer to avoid an obstacle or the
vessel drifts, you may go back your intended
course (Line 1 in the figure below). Use the
steering or highway display to help you
return to course.
Also, if you don’t need to return to the
original course, you can go directly to the
waypoint (Line 2 in the figure below) using
the restart function below.

Original course

Obstacle

Line 1

Line 2

Example of when to restart navigation


1. Set a destination.
2. Press the [WPT/RTE] key to open the

WAYPOINT & ROUTE menu.

3. Press the LOG soft key.

DGPS 3D

LOG

RE-
START

STOP

RVSE
ROUTE

SPEED

ETA 23:59 31.SEP

01

02

03

04

05

BRIDGE

HARBOR

WP<001>

WP<002>

WP<003>

34

°

23.564'N

135

°

2

3

.456'E

34

°

32.456'N

135

°

32.456'E

34

°

23.345'N

135

°

12.456'E

34

°

34.555'N

135

°

55.555'E

34

°

32.555'N

134

°

99.999'E

LEG

120.5

°

23.4nm

23.6

°

23.4nm

123.6

°

23.5nm

180.5

°

23.5nm

180.5

°

23.5nm

COORD

TYPE

Estimated Time of Arrival at last
waypoint

Passed waypoint (gray characters)

TO Waypoint (WPT no. in reverse video)

Log display

4. Press the RESTART soft key.