Fortinet FortiGate 60B - Manual (Page 41)

Configuring the modem interface Configuring the modem using the CLI
FortiGate-60B FortiOS 3.0 MR6 Install Guide
01-30006-0446-20080910
41
Keywords and variables Description Default
account_relation {equal |
fallback} When using a PCMCIA wireless
modem, set the relationship between
the wireless modem and the internal
modem.
equal - both accounts are equal.
When the FortiGate unit attempts to
connect, it tries both modems, and the
first one to connect becomes the
primary account connection.
fallback - the first account in the list
is the primary connection account. The
second account is a redundant account
that takes over when the primary
account drops its connection or fails.
As soon as the primary connection is
restored, the secondary connection
disconnects.
equal
altmode {enable | disable} Enable for installations using PPP in
China.
enable
auto-dial
{enable | disable} Enable to dial the modem automatically
if the connection is lost or the FortiGate
unit is restarted.
This is available only when
dial-on-demand is set to disabled,
and mode is set to standalone.
disable
connect-timeout Set the connection completion timeout
(30 - 255 seconds).
90
dial-on-demand
{enable | disable} Enable to dial the modem when
packets are routed to the modem
interface. The modem disconnects
after the idle-timer period.
This is available only if
auto-dial is set to disabled, and
mode is set to standalone.
disable
distance Enter the administrative distance (1-
255) to use for the default route that is
automatically added when the modem
connects and obtains an IP address. A
lower distance indicates a more
preferred route.
This keyword is useful for configuring
redundant routes in which the modem
interface acts as a backup to another
interface.
1
extra-init1 Enter additional initialization strings
that may be required for a proper
connection.
No default.
extra-init2 Enter additional initialization strings
that may be required for a proper
connection.
No default.
extra-init3 Enter additional initialization strings
that may be required for a proper
connection.
No default.